 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 298D Vishay Sprague Solid Tantalum Chip Capacitors MICROTANTM Lead Frameless Molded FEATURES * * * 0805 and 0603 Footprint Lead (Pb)-free face-down terminations 8 mm tape and reel packaging available per EIA-481-1 and reeling per IEC 286-3 7" [178 mm] standard RoHS COMPLIANT PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (To + 125 C voltage derating) Capacitance Range: 1 F to 220 F Capacitance Tolerance: 20 % standard Voltage Range: 2.5 WVDC to 25 WVDC ORDERING INFORMATION 298D MODEL 106 CAPACITANCE X0 CAPACITANCE TOLERANCE X0 = 20 % X9 = 10 % 010 DC VOLTAGE RATING AT + 85 C This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 V). M CASE CODE 2 TERMINATION T REEL SIZE AND PACKAGING This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. See Ratings 2 = 100 % Tin T = Tape and Reel and Case 4 = Gold Plated 7" [178 mm] Reel Codes Table Note: Preferred Tolerance and Reel size are in bold. We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in inches [millimeters] Anode Polarity Bar Anode Termination Cathode Termination C W H P1 P2 P1 L CASE M P L 0.063 0.004 [1.60 0.1] 0.094 0.004 [2.4 0.1] W 0.033 0.004 [0.85 0.1] 0.057 0.004 [1.45 0.1] H 0.031 0.004 [0.80 0.1] 0.043 0.004 [1.10 0.1] P1 0.020 0.004 [0.50 0.1] 0.020 0.004 [0.50 0.1] P2 0.024 0.004 [0.60 0.1] 0.057 0.004 [1.40 0.1] C 0.024 0.004 [0.60 0.1] 0.035 0.004 [0.90 0.1] www.vishay.com 38 For technical questions, contact: tantalum@vishay.com Document Number: 40065 Revision: 22-Oct-07 298D Solid Tantalum Chip Capacitors MICROTANTM Lead Frameless Molded RATINGS AND CASE CODES F 2.5 V 4V 6.3 V 10 V 16 V 1.0 M 2.2 M M M 3.3 4.7 M M M 6.8 10 M M M 15 M 22 M M 33 M M P* 47 M M P* P 100 M* P* P* 220 P P Note: * Preliminary values, contact factory for availability. 25 V M Vishay Sprague MARKING M-case Polarity bar Voltage Code P-case Polarity bar Capacitance Voltage Code Code P A Volts 4 6.3 10 16 20 25 Code G J A C D E GJ CAP, F 33 47 68 100 150 220 Code n s w A E J STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER MAX DC LEAKAGE AT + 25 C (A) MAX DF AT + 25 C (%) MAX ESR AT + 25 C 100 kHz () MAX RIPPLE 100 kHz Irms (A) C/C* (%) 47 100 220 10 22 33 47 100 220 2.2 4.7 10 22 33 47 100 2.2 4.7 10 15 33 47 1.0 2.2 4.7 1.0 4.7 M M P M M M M P P M M M M M P P M M M M P P M M M M P 2.5 WVDC AT + 85 C, SURGE = 3.3 V. . . 1.6 WVDC AT + 125 C, SURGE = 2.1 V 298D476X02R5M2T 2.4 20 4.0 0.08 298D107X02R5M2T 25.0 40 2.5 0.100 298D227X02R5P2T 11.0 30 3.0 0.122 4 WVDC AT + 85 C, SURGE = 5.2 V. . . 2.7 WVDC AT + 125 C, SURGE = 3.4 V 298D106X0004M2T 0.5 8.0 3.0 0.09 298D226X0004M2T 0.9 15 4.0 0.08 298D336X0004M2T 2.6 15 4.0 0.08 298D476X0004M2T 3.8 20 4.0 0.08 298D107X0004P2T 4.0 20 2.0 0.1 298D227X0004P2T 17.6 30 3.0 0.122 6.3 WVDC AT + 85 C, SURGE = 8 V. . . 4 WVDC AT + 125 C, SURGE = 5 V 298D225X06R3M2T 0.5 10 5.0 0.07 298D475X06R3M2T 0.5 8.0 3.0 0.09 298D106X06R3M2T 0.6 8.0 3.0 0.09 298D226X06R3M2T 2.8 15 4.0 0.08 298D336X06R3M2T 4.2 20 4.0 0.08 298D476X06R3P2T 3.0 22 3.0 0.122 298D107X06R3P2T 6.3 20 2.0 0.150 10 WVDC AT + 85 C, SURGE = 13 V. . . 7 WVDC AT + 125 C, SURGE = 8 V 298D225X0010M2T 0.5 10 10 0.05 298D475X0010M2T 0.5 6.0 4.0 0.08 298D106X0010M2T 1.0 8.0 4.0 0.08 298D156X0010M2T 1.5 12 4.0 0.08 298D336X0010P2T 3.3 10 2.0 0.150 298D476X0010P2T 4.7 22 3.0 0.122 16 WVDC AT + 85 C, SURGE = 20 V. . . 10 WVDC AT + 125 C, SURGE = 12 V 298D105X0016M2T 0.5 6.0 12.0 0.045 298D225X0016M2T 0.5 10 12.0 0.045 298D475X0016M2T 0.8 8.0 6.0 0.06 25 WVDC AT + 85 C, SURGE = 32 V. . . 17 WVDC AT + 125 C, SURGE = 20 V 298D105X0025M2T 0.5 6.0 10.0 0.05 298D475X0025P2T 1.2 6.0 4.0 0.106 30 30 30 10 15 20 30 30 30 10 10 10 15 30 20 20 10 15 15 20 10 20 15 15 15 10 10 Note * See Performance Characteristics tables, page 41. Document Number: 40065 Revision: 22-Oct-07 For technical questions, contact: tantalum@vishay.com www.vishay.com 39 298D Vishay Sprague Solid Tantalum Chip Capacitors MICROTANTM Lead Frameless Molded CAPACITORS PERFORMANCE CHARACTERISTICS ELECTRICAL PERFORMANCE CHARACTERISTICS ITEM Category Temperature Range Capacitance Tolerance Dissipation Factor (at 120 Hz) ESR (100 kHz) Leakage Current Reverse Voltage PERFORMANCE CHARACTERISTICS - 55 C to + 85 C (to + 125 C with voltage derating) 20 %, 10 % (at 120 Hz) 2 Vrms at + 25 C using a capacitance bridge Limits per Standard Ratings Table. Tested via bridge method, at 25 C, 120 Hz. Limits per Standard Ratings Table. Tested via bridge method, at 25 C, 100 kHz. After application of rated voltage applied to capacitors for 5 minutes using a steady source of power with 1 k resistor in series with the capacitor under test, leakage current at 25 C is not more than described in. See graph below for the appropriate adjustment factor. Capacitors are capable of withstanding peak voltages in the reverse direction equal to: 10 % of the DC 5 % of the DC rating at + 85 C Vishay does not recommended intentional or repetitive application of reverse voltage If capacitors are to be used at temperatures above + 25 C, the permissible rms ripple current or voltage 1.0 at + 25 C 0.9 at + 85 C 0.4 at + 125 C Maximum Permissible Power Dissipation at 25 C (W) in free air Operating Temperature M-Case: 0.025 P-Case: 0.045 + 85 C RATING WORKING VOLTAGE SURGE VOLTAGE 4 5.2 6.3 8 10 13 16 20 20 26 25 32 35 46 50 65 + 125 C RATING WORKING VOLTAGE SURGE VOLTAGE 2.7 3.4 4 5 7 8 10 12 13 16 17 20 23 28 33 40 Temperature Derating TYPICAL LEAKAGE CURRENT FACTOR RANGE 100 LEAKAGE CURRENT FACTOR 10 + 125 C + 85 C + 55 C + 25 C 0 C 1.0 0.1 - 55 C 0.01 0.001 0 10 20 30 40 50 60 70 80 90 100 PERCENT OF RATED VOLTAGE Notes * At + 25 C, the leakage current shall not exceed the value listed in the Standard Ratings Table. * At + 85 C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings Table. * At + 125 C, the leakage current shall not exceed 12 times the value listed in the Standard Ratings Table www.vishay.com 40 For technical questions, contact: tantalum@vishay.com Document Number: 40065 Revision: 22-Oct-07 298D Solid Tantalum Chip Capacitors MICROTANTM Lead Frameless Molded ENVIRONMENTAL PERFORMANCE CHARACTERISTICS ITEM Life Test at + 85 C CONDITION 1000 h application of rated voltage at 85 C with a 3 series resistance, MIL-STD 202G Method 108A At 40 C/90 % RH 500 h, no voltage applied. MIL-STD 202G Method 103B POST TEST PERFORMANCE Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Leakage Current Refer to Standard Ratings Table Not to exceed 150 % of initial Not to exceed 200 % of initial Refer to Standard Ratings Table Not to exceed 150 % of initial Not to exceed 200 % of initial Refer to Standard Ratings Table Not to exceed 150 % of initial Not to exceed 200 % of initial Vishay Sprague Humidity Tests Thermal Shock At - 55 C/+ 125 C, 30 min. each, for 5 cycles. MIL-STD 202G Method 107G MECHANICAL PERFORMANCE CHARACTERISTICS TEST CONDITION Terminal Strength CONDITION Apply a pressure load of 5 N for 10 1 s horizontally to the center of capacitor side body. AECQ-200 rev. C Method 006 POST TEST PERFORMANCE Capacitance Change Dissipation Factor Leakage Current Refer to Standard Ratings Table Initial specified value or less Initial specified value or less There shall be no mechanical or visual damage to capacitors post-conditioning. Substrate Bending (Board flex) Vibration With parts soldered onto substrate test board, apply force to the test board for a deflection of 1 mm. AECQ-200 rev. C Method 005 MIL-STD-202G, Method 204D, 10 Hz to 2000 Hz, 20 G Peak Capacitance Change Dissipation Factor Leakage Current Capacitance Change Dissipation Factor Leakage Current Refer to Standard Ratings Table Initial specified value or less Initial specified value or less Refer to Standard Ratings Table Initial specified value or less Initial specified value or less There shall be no mechanical or visual damage to capacitors post-conditioning. Shock Mil-Std-202G, Method 213B, Condition I, 100G Peak Capacitance Change Dissipation Factor Leakage Current Refer to Standard Ratings Table Initial specified value or less Initial specified value or less There shall be no mechanical or visual damage to capacitors post-conditioning. Resistance to Solder Heat At 260 C, for 10 seconds, reflow Capacitance Change Dissipation Factor Leakage Current Refer to Standard Ratings Table Not to exceed 150 % of initial Not to exceed 200 % of initial There shall be no mechanical or visual damage to capacitors post-conditioning. Solderability MIL-STD-202G, Method 208H, ANSI/J-Std-002, Test B. Applies only to Solder and tin plated terminations. Does not apply to gold terminations. MIL-STD-202, Method 215D Encapsulation materials meet UL94 VO with an oxygen index of 32 %. There shall be no mechanical or visual damage to capacitors post-conditioning. There shall be no mechanical or visual damage to capacitors post-conditioning. Resistance to Solvents Flammability www.vishay.com 41 For technical questions, contact: tantalum@vishay.com Document Number: 40065 Revision: 22-Oct-07 298D Vishay Sprague Solid Tantalum Chip Capacitors MICROTANTM Lead Frameless Molded TYPICAL CURVES AT + 25 C, IMPEDANCE AND ESR VS. FREQUENCY "M" Case 100 IMPEDANCE ESR 10 ESR/Z, 10 ESR/Z, 100 IMPEDANCE ESR "M" Case 1 47 F - 4 V 22 F - 4 V 1 0.1 0.1 0.1 1 10 FREQUENCY, kHz 100 1000 1 10 FREQUENCY, kHz 100 1000 1000 "M" Case IMPEDANCE ESR "M" Case 1000 IMPEDANCE ESR 100 100 ESR/Z, ESR/Z, 10 4.7 F - 10 V 1 10 F - 6 V 1 0.1 0.1 0.1 10 1 10 FREQUENCY, kHz 100 1000 1 10 FREQUENCY, kHz 100 1000 "M" Case 1000 IMPEDANCE ESR 100 ESR/Z, "M" Case 10 000 IMPEDANCE ESR 1000 ESR/Z, 100 1 F - 16 V 10 10 F - 10 V 10 1 0.1 1 10 FREQUENCY, kHz 100 1000 1 0.1 1 10 FREQUENCY, kHz 100 1000 www.vishay.com 42 For technical questions, contact: tantalum@vishay.com Document Number: 40065 Revision: 22-Oct-07 298D Solid Tantalum Chip Capacitors MICROTANTM Lead Frameless Molded Vishay Sprague TYPICAL CURVES AT + 25 C, IMPEDANCE AND ESR VS. FREQUENCY "P" CASE 100.0 IMPEDANCE ESR 100.0 10.0 1000.0 IMPEDANCE ESR "P" CASE ESR/Z, ESR, Z 1.0 33 F - 10 V 0.1 0.1 1 10 100 1000 FREQUENCY, kHz 10.0 1.0 4.7 F - 25 V 0.1 0.1 1 10 FREQUENCY, kHz 100 1000 "P" CASE 100.0 IMPEDANCE ESR 10.0 ESR, Z 10.0 "P" CASE IMPEDANCE ESR ESR, Z 1.0 1.0 47 F - 10 V 0.1 0.1 0.1 220 F - 4 V 0.1 1 10 FREQUENCY, kHz 100 1000 1 10 FREQUENCY, kHz 100 1000 Document Number: 40065 Revision: 22-Oct-07 For technical questions, contact: tantalum@vishay.com www.vishay.com 43 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1 |
Price & Availability of 298D476X02R5M2T
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |